IPv6 Address

IPv6 address or IP version 6 or IP Next Generation (IPng), is the IP address used on the IPv6 protocol. IPv6, or Internet Protocol version 6, is the latest IP protocol that is reserved for future purposes. It has been around for over twenty years, the Internet Protocol Version 4 (IPv4). IPv4 provides all the 32-bit IP address or IP address a number of 232 pieces. IP address allocation as much as it was originally considered sufficient. Until 1991, there is a fear that one day the number of hosts connected to the Internet will exceed the capacity of IPv4.

That concern prompted experts to formulate a version of the new Internet protocol. The proposal submitted in 1992 and for several years received input from various parties. After experiencing a long journey, eventually forming a new yanh protocol called Internet Protocol Version 6 (IPv6) or Next Generation Internet Protocol.

IP Address

For those of you who study Internet and Computer Communications and Networks, must be familiar with the name IP Address. IP Address is a numbering on a computer as an identity. If simplified, are like a house address name. Thus each computer has a numerical address of each - each. One to another will not be the same or unique.

IP Address that is often used is to use the base TCP / IP because it is simpler and easier to understand. While at OSI Layer itself has its own IP Address, which is of course different from the TCP / IP. But in this world that is more commonly known and used IP Address TCP / IP (Read: The History and Development of the Internet).

IP Address itself is divided into two, namely IP Address Private and Public IP Address. Private IP Address normally be obtained by the home user or small scale. The Private IP Address obtained after subnetting. Public IP Address is usually held on a large scale, such as Hosting, ISPs, data centers, and enterprise Web.

Install Connector Cable Network

To install an RJ-45 connector on the cable UTP There are two types of installation:

Type straight and Type cross

1. Type straight

is used to connect a computer to the hub / switch hub

The order of installation:

Standard A:

A tip of the tip B

1. Green White

2. Green

3. Orange White

4. Blue

5. Blue White

6. Orange

7. Brown White

8. Brown

1. Green White

2. Green

3. Orange White

4. Blue

5. Blue White

6. Orange

7. Brown White

8. Brown

Standard B:

A tip of the tip B

1. Orange White

2. Orange

3. Green White

4. Blue

5. Blue White

6. Green

7. Brown White

8. Brown

1. Orange White

2. Orange

3. Green White

4. Blue

5. Blue White

6. Green

7. Brown White

8. Brown

2. The type of cross / cross

specifically to connect two computers directly without using a hub / switch hub. For now cross type can be used to connect a computer to the hub. The latest Hub own auto sense so that it can detect the type of cable attached.